LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Automatic Transmission - 6F35) >> Diagnosis And Testing >> Automatic Transmission >> Diagnostic Routines >> Pinpoint Test L: P0720, P0721, P0722 >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The OSS  sensor is a Hall-effect sensor that sends a signal to the PCM that indicates transmission output shaft speed. The OSS  sensor is used for TCC  control and shift scheduling.

DTC FAULT TRIGGER CONDITION

DTC Description Fault Trigger Conditions
P0720 OSS  Sensor Circuit No input from OSS  sensor.
P0721 OSS  Sensor Circuit Range/Performance Unrealistic change in OSS  sensor signal, erratic or intermittently no input.
P0722 OSS  Sensor Circuit No Signal No input from OSS  sensor.