LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Automatic Transmission - 6F35) >> Diagnosis And Testing >> Automatic Transmission >> Diagnostic Routines >> Pinpoint Test C: P0760, P0763, P0764, P0979, P0980 >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The TCM  applies and releases the various clutches in the transmission by actuating the shift solenoids in the solenoid body. SSC  is a VFS  .

DTC FAULT TRIGGER CONDITION

DTC Description Fault Trigger Conditions
P0760 SSC  Open circuit in the solenoid or wire harness.
P0763 SSC  Electrical Open circuit in the solenoid or wire harness.
P0764 SSC  Intermittent Intermittent circuit in the solenoid or wire harness open, shorted to ground or shorted to power.
P0979 SSC  Control Circuit Low Short to ground in the solenoid or wire harness.
P0980 SSC  Control Circuit High Open circuit or short to power in the solenoid or wire harness.
scientia non olet · About LEMON Manuals