LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 219 (Automatic Transmission - 6F50/6F55) >> Removal And Installation >> Manual Control Lever Shaft Seal >> Installation

Manual Control Lever Shaft Seal: Installation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the specified lubricant to the specified component.

    Shop Supplies: Petroleum Jelly.

    Special Tool(s): Manual Lever Seal Installer 307-581.

    G08412501
  2. Install the TR  sensor. Refer to DIGITAL TRANSMISSION RANGE (TR) SENSOR .