LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 219 (Automatic Transmission - 6F50/6F55) >> Removal And Installation >> Main Control Cover >> Installation

Main Control Cover: Installation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for damage. Visual check.
    G08412897
  2. NOTE: Install the studbolts in the correct locations as noted during disassembly.
    G08412656
    • Tighten to 12 Nm (106 lb-in).
      G08412899
    • Tighten to 9 Nm (80 lb-in).
      G08626994
  5. Visual check. Apply the specified lubricant to the specified component.

    Material: Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC.

    1. Seal (7D258)
    2. Backing ring (7J324)
      G08614436
  6. G08626991
    • Tighten the bolt to 9 Nm (80 lb-in).
    • Tighten the nut to 30 Nm (22 lb-ft).
      G08627001
  8. G08621946
  9. G08621945
  10. Install the ACL  assembly. Ford additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING .
  11. Fill with clean transmission fluid to the correct level.
scientia non olet · About LEMON Manuals