LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 219 (Automatic Transmission - 6F50/6F55) >> Diagnosis And Testing >> Automatic Transmission >> Diagnostic Routines >> Pinpoint Test I >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The LPC  solenoid is a VFS  . The LPC  solenoid is an electro-hydraulic actuator combining a solenoid and a regulating valve. It supplies the pressure which regulates transmission line pressure. This is done by producing resisting forces to the main regulator and line modulator circuits. These 2 pressures control clutch application pressures.

DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
P0748 LPC  electrical circuit general fault LPC  electrical circuit general fault. May set along with P0960, P0962 and P0963.
P0960 LPC  electrical circuit open fault Open circuit in solenoid circuitry.
P0962 LPC  electrical circuit short to ground fault Short to ground in solenoid circuitry.
P0963 LPC  electrical circuit short to power fault Short to power in solenoid circuitry.