Vehicle Certification (VC) Label Example
WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
The Vehicle Certification (VC) label is located in the driver door jamb. The axle code is on the VC label. Refer to IDENTIFICATION CODES .
The axle ratio's used are 3.16, 3.21, 3.36, and 3.39. The ring gear has a diameter of 174 mm (6.85 in).
The wheel speed sensor rings for FWD vehicles are located on the front halfshafts and are mounted to the rear inner spindles.
The wheel speed sensor rings are located on the front and rear halfshafts for AWD vehicles.