LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Engine Mechanical - 2.0L GTDI) >> In-Vehicle Repair >> Valve Seals >> Installation

Valve Seals: Installation

WARNING: This page is about a different car, the 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Lubricate the valve seal with clean engine oil prior to installing.

    Using the Valve Stem Oil Seal Installer, install the valve seal.

    G08028648
  2. Install the valve spring. For additional information, refer to VALVE SPRINGS  .
scientia non olet · About LEMON Manuals