LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Engine Mechanical - 2.0L GTDI) >> In-Vehicle Repair >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

WARNING: This page is about a different car, the 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Remove the through-bolt from the Camshaft Front Oil Seal Installer.
    NOTE: Lubricate the oil seal with clean engine oil.

    Using the Camshaft Front Oil Seal Installer, install the crankshaft front oil seal.

    G08028584
  2. Install the crankshaft pulley. For additional information, refer to CRANKSHAFT PULLEY  .
scientia non olet · About LEMON Manuals