LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Engine Mechanical - 3.7L) >> In-Vehicle Repair >> Engine Mount >> Removal

Engine Mount: Removal

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine appearance cover. For additional information, refer to ENGINE APPEARANCE COVER - EXPLODED VIEW  .
  2. NOTE: Failure to position the wood block and floor jack as illustrated can result in damage to the oil pan.

    Position a floor jack with a block of wood under the front of the oil pan.

    Fig 1: Positioning Floor Jack
    G09293200Courtesy of FORD MOTOR CO.
  3. Remove the 3 bolts and position the engine coolant degas bottle aside.
  4. Remove the nut, bolt and engine mount brace.
    Fig 2: Locating Nut, Bolt And Engine Mount Brace
    G09291974Courtesy of FORD MOTOR CO.
  5. Remove the 4 engine mount nuts.
    G09291975
  6. Remove the 3 bolts and the engine mount.
    G09291976
scientia non olet · About LEMON Manuals