LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Engine Mechanical - 3.7L) >> In-Vehicle Repair >> Crankshaft Pulley >> Removal

Crankshaft Pulley: Removal

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the accessory drive belt and the power steering belt. For additional information, refer to ACCESSORY DRIVE .
  3. Remove the crankshaft pulley bolt and washer.
    • Discard the bolt.
      G09291908
  4. Using the 3 Jaw Puller, remove the crankshaft pulley.
    G08621626
scientia non olet · About LEMON Manuals