Component testing procedure
WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
| Circuit to test |
Connect self-powered test light or ohmmeter to terminals |
Move switch to these positions |
A good switch will indicate |
| One-Touch Up/Dawn |
4 and 6 |
One-Touch Up/Down |
Closed circuit |
| Neutral |
Open circuit |
| Right front window circuit |
2 and 3 |
Up |
Closed circuit |
| 5 and 2 |
Down |
Closed circuit |