Pinpoint Test An: The Headlamps On Warning Chime Is Inoperative

• Ignition OFF.
• Ignition ON.
• Monitor the safety belt warning chime when the ignition is transitioned from OFF to RUN for 6 seconds.

Does the safety belt warning chime operate for approximately 6 seconds? 

• Yes  : GO to AN2 
• No  : INSTALL a new IPC  .

  REFER to: INSTRUMENT PANEL CLUSTER (IPC) .

• Open and close the driver door.
• Observe the interior lamps.

Do the interior lamps operate correctly from the driver door? 

• Yes  : GO to AN3 
• No  : REFER to: INTERIOR LIGHTING .

• Using a diagnostic scan tool, perform the IPC  self-test.

Are any Diagnostic Trouble Codes (DTCs) recorded? 

• Yes  : REFER to DTC CHART: IPC .
• No  : DIAGNOSE all BCM  Diagnostic Trouble Codes (DTCs).

  REFER to: BODY CONTROL MODULE (BCM) .