LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Taurus Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1945 (Exterior Trim & Ornamentation -- F250-F550 Super Duty) >> Removal And Installation >> Fender Vent >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Right side shown in illustration, left side similar.
    NOTE: Protect the front fender with a fender cover or rag and use a plastic pry tool to remove the front fender vent.
  1. Remove the fender vent.
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals