Pinpoint Test C: Diagonal Wear
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- C1 MEASURE THE TREAD DEPTH
- Using a tread depth gauge or similar tool, measure the tread depth of the wear pattern.
- Is the tread depth greater than 2/32 inch?
- Yes
: If no performance concerns (noise/vibration) are present, the tire can remain in service. CHECK the tire pressure, ADJUST as necessary. ROTATE the wheel and tire assemblies. REFER to Wheel and Tire Rotation .
INSPECT for loose, worn or damaged suspension components. INSTALL new components as necessary. CHECK the alignment and ADJUST as necessary. REFER to SUSPENSION SYSTEM - GENERAL INFORMATION .
- No
: INSTALL a new tire(s). CHECK the tire pressure in the tires, ADJUST as necessary. ROTATE the wheel and tire assemblies. REFER to Wheel and Tire Rotation .
INSPECT for loose, worn or damaged suspension components. INSTALL new components as necessary. CHECK the alignment and ADJUST as necessary. REFER to SUSPENSION SYSTEM - GENERAL INFORMATION .
- Yes
: If no performance concerns (noise/vibration) are present, the tire can remain in service. CHECK the tire pressure, ADJUST as necessary. ROTATE the wheel and tire assemblies. REFER to Wheel and Tire Rotation .