LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang V8-5.4L SC >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair >> Supercharger Belt Tensioner

Supercharger Belt Tensioner




Supercharger Belt Tensioner

Removal and Installation

1. Rotate the Supercharger (SC) belt tensioner clockwise and remove the SC (Supercharger) belt from the SC (Supercharger) pulley.

2. NOTE: The SC (Supercharger) belt is routed behind the SC (Supercharger) belt tensioner.
Remove the SC (Supercharger) belt tensioner bolt and tensioner.

- To install, tighten to 48 Nm (35 lb-ft).


3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals