LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang V6-3.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair >> Accessory Drive Belt Tensioner

Accessory Drive Belt Tensioner




Accessory Drive Belt Tensioner - 3.7L

Removal and Installation

1. Rotate the accessory drive belt tensioner counterclockwise and remove the accessory drive belt.





2. Remove the 2 bolts and the accessory drive belt tensioner.
- To install, tighten to 25 Nm (18 lb-ft).


3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals