General Specifications
WARNING: This page is about a different car, the 2012 Ford Pickup and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Backlash Specifications | |
| Backlash between ring gear and pinion teeth | 0.204-0.304 mm (0.008-0.012 in) max |
| Ring gear maximum backlash variation between teeth | 0.102 mm (0.004 in) |
| Clearance Specifications | |
| Differential case maximum runout | 0.076 mm (0.003 in) |
| Pinion flange maximum radial runout in assembly | 0.305 mm (0.012 in T.I.R.) |
| Rotational Torque Ranges | |
| Driver handle | 2.2 Nm (20 lb-in) |
| Pinion bearing preload | 1.8-3.3 Nm (16-29 lb-in) |