Coolant Changed Maintenance Reset- Optional Instrument Cluster
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The optional instrument cluster can be identified by a 5 button message center switch located on the steering wheel and a 4.2 inch LCD display located in the center of the instrument cluster.
- Access the message center main menu screen. Using the up and down arrow buttons scroll and select the Settings tab. Press the OK button.
- Using the up and down arrow buttons scroll and select the Vehicle tab. Press the OK button.
- Using the up and down arrow buttons scroll and select the Maintenance tab. Press the OK button.
- Using the up and down arrow buttons scroll and select the Coolant Changed tab. Press the OK button.
- Press and hold the OK button if the coolant has been changed or additive checked. A message will appear confirming the setting. To exit use the left arrow to navigate back to the main menu.