LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Boss 302 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1554 (Automatic Transmission - Diagnostic Trouble Code (DTC) Charts And Pinpoint Tests - 2.7L ECOBOOST (238KW/324PS) & 3.5L DURATEC (209KW 284PS)) >> Diagnostic Trouble Code (DTC) Charts and Pinpoint Tests - 2.7L EcoBoost (238kW/324PS) >> Pinpoint Tests >> Pinpoint Test A : Transmission Control Solenoids >> Notes

Pinpoint Test A : Transmission Control Solenoids: Notes

WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Refer to TRANSMISSION CONTROLS for schematic and connector information.

Normal Operation 

When the electrical connector or solenoid body is disconnected, inspect the connector for terminal condition, corrosion and contamination. Also inspect the connector seal for damage. Clean, repair or install new components as required. Power is routed through the Transmission Solenoid Power Control (TSPC) relay (inside the PCM) to all transmission solenoids. If the power circuit to the transmission solenoids or the TSPC relay fails open, then all solenoids are failed electrically OFF. CHECK for open, short to ground or the transmission connector disconnected. The TSPC relay disables power to the transmission solenoids when certain transmission DTCs are set