Powertrain Control Module (PCM): Removal
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Please advise the customer that this vehicle is equipped with an adaptive transmission shift strategy which allows the vehicle's computer to learn the transmission's unique parameters and improve shift quality. When the adaptive strategy is reset, the computer will begin a re-learning process. This re-learning process may result in firmer than normal upshifts and downshifts for several days.
- If replacing the PCM, connect the scan tool to the vehicle. Allow the scan tool to identify the vehicle and obtain configuration data.
- All programmable module information will automatically be retrieved by the VCM.
- Disconnect the 3 PCM electrical connectors.
- Remove the 2 nuts and position the PCM wiring harness support bracket aside.
- Remove the PCM.
NOTE:
Refer to
INTRODUCTION -- GASOLINE MODELS
and SERVICE INFORMATION
for correct Vehicle Communication Module (VCM) hook-up procedure.