LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Fuel Charging System & Fuel Control System - 6.7L Diesel -- F250-F550 Super Duty) >> Removal And Installation >> Fuel Injector Supply Tube >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Whenever a fuel injector supply tube fitting is loosened, a new fuel injector supply tube must be installed. The steps required to remove and install a fuel injector supply tube are included in the fuel injector procedure. For additional information, refer to FUEL INJECTORS .
scientia non olet · About LEMON Manuals