LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (HVAC - Climate Control System -- F250-F550 Super Duty) >> Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
A/C clutch disc and hub bolt 14 - 124
A/C compressor bolts 25 18 -
A/C compressor fitting nuts (suction and discharge) 15 - 133
A/C pressure relief valve 10 - 89
Condenser bolts 11 - 97
Condenser fitting nuts (inlet and outlet) 15 - 133
Condenser inlet jumper line fitting nut 15 - 133
Evaporator-to-compressor suction line fitting nut 15 - 133
Heater core and evaporator core housing bolts (interior or exterior) 7 - 62
Heater core and evaporator core housing nuts (exterior) 7 - 62
Heater core and evaporator core housing nut (interior) 6 - 53
High-pressure Schrader-type valve 2.5 - 22
High-pressure service gauge port valve cap 0.8 - 7
Horn assembly bolt 35 26 -
instrument panel lower support bracket bolts 9 - 80
Low-pressure Schrader-type valve 1.8 - 16
Low-pressure service gauge port valve cap 0.8 - 7
Power steering cooler bolts 35 26 -
RH center link nut 115 85 -
Steering linkage damper bolt - Four-Wheel Drive (4WD) 80 59 -
Steering linkage damper bolt and nut - Rear Wheel Drive (RWD) 90 66 -
Thermostatic Expansion Valve (TXV) bolts 8 - 71
TXV fitting nut 15 - 133