Removal and Installation
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Lower the glove compartment.
- Detach the 2 lower passenger side register retaining tabs and tilt the register outward.
- Grasp the sides of the passenger side register housing through the opening between the register vanes and pull the register rearward to disengage to 2 upper retaining tabs.
- Remove the passenger side register.
- To install, reverse the removal procedure.