LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (HVAC - Climate Control System -- F250-F550 Super Duty) >> Removal And Installation >> Register - Driver Side >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH instrument panel side finish panel.
  2. Working through the LH instrument panel end panel opening, detach the 2 lower driver side register retaining tabs and tilt the register outward.
  3. Grasp the sides of the driver side register housing through the opening between the register vanes and pull the register rearward to disengage to 2 upper retaining tabs.
  4. Remove the driver side register.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals