LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (HVAC - Climate Control System -- F250-F550 Super Duty) >> Removal And Installation >> Clutch and Clutch Field Coil >> Removal

Clutch and Clutch Field Coil: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C compressor. For additional information, refer to AIR CONDITIONING (A/C) COMPRESSOR - 6.2L AND 6.8L  or AIR CONDITIONING (A/C) COMPRESSOR - 6.7L DIESEL .
  2. Remove the A/C clutch disc and hub bolt.
    1. Using the Compressor Clutch Holding Tool, hold the A/C clutch disc and hub.
    2. Remove the A/C clutch disc and hub bolt.
      Fig 1: Removing A/C Clutch Disc And Hub Bolt
      G06064733Courtesy of FORD MOTOR CO.
  3. Remove the A/C clutch disc and hub.
  4. Remove the A/C compressor pulley snap ring.
    5. NOTE: Do not use air tools. Damage to the Air Conditioning (A/C) clutch pulley or A/C compressor may result.
  5. Remove the A/C compressor pulley.
    1. Install the Compressor Pulley Remover.
    2. Using the Compressor Pulley Remover, remove the A/C compressor pulley.
      Fig 2: Removing A/C Compressor Pulley
      G06064734Courtesy of FORD MOTOR CO.
  6. Remove the A/C clutch field coil snap ring.
  7. Remove the A/C clutch field coil electrical connector bracket screw.
  8. Remove the A/C clutch field coil.
scientia non olet · About LEMON Manuals