LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (HVAC - Climate Control System -- F250-F550 Super Duty) >> Removal And Installation >> Auxiliary Heater Control Module (AHCM) >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Disconnect the Auxiliary Heater Control Module (AHCM) electrical connector.
  3. Remove the 2 AHCM battery cable nuts and disconnect the cables.
  4. Remove the 2 AHCM screws.
  5. Remove the AHCM.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals