LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (HVAC - Climate Control System -- F250-F550 Super Duty) >> Removal And Installation >> Ambient Air Temperature Sensor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a suitable non-metallic tool, pry and detach the ambient air temperature sensor bezel from the RH exterior mirror housing.
  2. Rotate the ambient air temperature sensor counter-clockwise and detach it from the ambient air temperature sensor bezel.
  3. Disconnect the ambient air temperature sensor electrical connector and remove the ambient air temperature sensor.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals