LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Fuel Charging And Controls - 6.8L (3V) -- F450 & F550 Super Duty) >> Removal And Installation >> Throttle Body - Spacer >> Removal

Throttle Body - Spacer: Removal

WARNING: This page is about a different car, the 2012 Ford F550 Super Duty and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Throttle Body (TB). For additional information, refer to Throttle Body .
  2. Disconnect the PCV tube quick connect coupling from the TB spacer. For additional information, refer to FUEL SYSTEM - GENERAL INFORMATION - GASOLINE AND DIESEL .
  3. Disconnect the Evaporative Emission (EVAP) canister purge valve vacuum tube quick connect coupling from the TB spacer. For additional information, refer to FUEL SYSTEM - GENERAL INFORMATION - GASOLINE AND DIESEL .
  4. Remove the 2 screws and the PCV heated element.
  5. Remove the 2 upper TB spacer bolts.
  6. Remove the 4 lower TB spacer bolts, the TB and discard the TB spacer gasket.
scientia non olet · About LEMON Manuals