Spark Plugs: Installation
WARNING: This page is about a different car, the 2012 Ford Pickup and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
All spark plugs
- Adjust the spark plug gaps as necessary. For the correct spark plug gap specification, refer to SPECIFICATIONS in this information.
- Install the spark plugs.
- Tighten to 18 Nm (159 lb-in).
Lower spark plugs
- Connect the ignition wire to the lower spark plugs.
Upper spark plugs
- Install the ignition coil-on-plugs. For additional information, refer to IGNITION COIL-ON-PLUG in this information.
NOTE:
Only use hand tools when removing or installing the spark plugs or damage can occur to the cylinder head or spark plug.