LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Information System And Entertainment System -- F250-F550 Super Duty) >> Removal And Installation >> Tool Link™ Antenna >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Support the Tool Link™ antenna while the 4 screws are being removed. Do not allow it to hang from the antenna cable.
  1. Remove the 4 Tool Link™ antenna screws.
    • Disconnect the antenna cable.
  2. Remove the Tool Link™ antenna and cover.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals