LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Information System And Entertainment System -- F250-F550 Super Duty) >> Removal And Installation >> Audio Input Jack >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a suitable flat-bladed tool, remove the audio input jack bezel by prying it straight rearward.
    • Disconnect the audio input jack electrical connector.
  2. Release the tabs and remove the audio input jack.
    Fig 1: Locating Audio Input Jack Tabs
    G06063153Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.