LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Wiper System & Washer System -- F250-F550 Super Duty) >> General Procedures >> Wiper Blade and Pivot Arm Adjustment

Wiper Blade and Pivot Arm Adjustment

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Cycle and park the windshield wipers.
  2. NOTE: Make sure there is no mechanical binding in the linkage preventing the wiper arms from returning to the fully PARKED position.
    Fig 1: Identifying Distance Between Center Of Passenger Windshield Wiper Blade And Bottom Of Windshield Glass
    G06764185Courtesy of FORD MOTOR CO.
  3. Verify the distance between the center of the passenger windshield wiper blade and the bottom of the windshield glass is within specification.
  4. Verify the distance between the center of the driver windshield wiper blade and the bottom of the windshield glass is within specification.
    Fig 2: Identifying Distance Between Center Of Driver Windshield Wiper Blade And Bottom Of Windshield Glass
    G06764186Courtesy of FORD MOTOR CO.
  5. If the distance is not within specification, remove the windshield wiper pivot arms and reposition to specification. For additional information, refer to WIPER PIVOT ARM .