Normal Operation
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
When the multifunction switch is placed in the WASH position, the SCCM sends the request to the windshield wiper motor over the LIN. The windshield wiper motor then supplies power to the washer pump which directs washer fluid to the windshield.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Multifunction switch
- Windshield wiper motor
- Washer pump