Pick-up Bed

The pick-up bed consists of: 

• style side pick-up bed (pan assembly).
• pick-up box tie-down hooks.
• body side wheel opening splash shield.
• rear-wheel opening moulding (4WD only).

The styleside pick-up bed: 

• is standard.
• comes in standard lengths of 1.67 m (5.5 ft) or 1.98 m (6.5 ft) or optional 2.43 m (8 ft) length.
• is double-wall aluminum construction.
• houses 2 stake pockets in the top of the 1.68 m (5.5 ft) bed, 4 stake pockets in the 1.98 m (6.5 ft) bed and 6 stake pockets in the 2.43 m (8 ft) bed.
• on 4WD vehicles, includes rear-wheel opening mouldings.
• is constructed of an inner aluminum box and aluminum tailgate with stamped outer panels.

Styleside pick-up beds: 

• come standard with 4 pick-up bed tie-down hooks.

The tailgate assembly consists of: 

• tailgate.
• tailgate hinges.
• tailgate support cables.
• torsion rod.
• tailgate damper (if equipped).
• tailgate step (if equipped).
• tailgate step handle (if equipped).
• rear view camera (if equipped).
• power locking tailgate latch release (if equipped).

For power locking tailgate latch release diagnosis, For additional information, refer to: Locks, Latches and Entry Systems .

Tailgate Step Binding 

Binding can consist of any of the three conditions:

• Increased operational effort and/or inability to open or close the tailgate step after button deployment.
• Increased operational effort and/or inability to open or close the tailgate step during normal operation.
• When fully extended the tailgate step won't drop down or won't slide back into the tailgate from the drop down position without excessive effort.

Should any of these conditions exist: For additional information, refer to: Tailgate Step Adjustment .