LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 738 (SEATBELT Systems) >> General Procedures >> Seatbelt Procedure After a Collision

Seatbelt Procedure After a Collision

WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Inspection 

WARNING: All safety belt components must be inspected and corrected as part of any collision repair. Inspect all safety belt components as prescribed by Safety Belt Inspection and Repair After a Collision found in GENERAL PROCEDURES . Failure to follow this instruction may result in incorrect operation of the safety belt system and increase the risk of serious personal injury or death in a crash.

  1. 1.

    Before installing the new safety belt assembly, inspect the safety belt attaching areas for damage and distortion. If the attaching points are damaged and distorted, work the sheet metal back to its original shape and structural integrity.

  1. 2.

    Install new safety belt(s) at any seating position(s) where deployment has occurred and the safety belt(s) were used. Carry out the appropriate Functional Test procedure for all seating positions. Refer to: Seatbelt Systems .
scientia non olet · About LEMON Manuals