LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 734 (Side And Rear Vision) >> Diagnosis And Testing >> Blind Spot Information System >> Pinpoint Tests >> Pinpoint Test I : DTC (Diagnostic Trouble Code) U0199:00 >> Notes

Pinpoint Test I : DTC (Diagnostic Trouble Code) U0199:00: Notes

WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Module Communications Network for schematic and connector information.

Normal Operation and Fault Conditions 

The SODL communicates with the DDM through the MS-CAN.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U0199:00 Lost Communication With "Door Control Module A": No Sub Type Information A continuous memory DTC that sets in the SODL when expected messages from the DDM are missing for 2 seconds or more.

Possible Causes