LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 731 (Information And Entertainment System - General Information - Vehicles With: Touchscreen Display) >> Diagnosis And Testing >> Information and Entertainment System >> DTC Chart: DACMC

DTC Chart: DACMC

WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
DTC Description Action
U0100:00 Lost Communication With ECM/ PCM "A": No Sub Type Information GO to Pinpoint Test AG 
U0140:00 Lost Communication With Body Control Module: No Sub Type Information GO to Pinpoint Test AH 
U2024:00 Control Module Cal-Config Data: No Sub Type Information This DTC sets due to an incomplete or incorrect DACMC PMI. CHECK the vehicle service history for recent service actions related to the DACMC or ACM.
If there have been recent service actions with the DACMC or ACM, REPEAT/PERFORM the DACMC PMI procedure as directed by the diagnostic scan tool. REFER to: Module Configuration - System Operation and Component Description . See PMI.
If there have been no recent service actions, the DACMC has failed to retain configuration data. INSTALL a new ACM. REFER to: Audio Front Control Module (ACM) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information This DTC sets due to an incomplete or incorrect DACMC PMI. CHECK the vehicle service history for recent service actions related to the DACMC or ACM.
If there have been recent service actions with the DACMC or ACM, REPEAT/PERFORM the DACMC PMI procedure as directed by the diagnostic scan tool. REFER to: Module Configuration - System Operation and Component Description . See PMI.
If there have been no recent service actions, the DACMC has failed to retain configuration data. INSTALL a new ACM. REFER to: Audio Front Control Module (ACM) .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information This DTC sets due to an incomplete or incorrect DACMC PMI. CHECK the vehicle service history for recent service actions related to the DACMC or ACM.
If there have been recent service actions with the DACMC or ACM, REPEAT/PERFORM the DACMC PMI procedure as directed by the diagnostic scan tool. REFER to: Module Configuration - System Operation and Component Description . See PMI.
If there have been no recent service actions, the DACMC has failed to retain configuration data. INSTALL a new ACM. REFER to: Audio Front Control Module (ACM) .
U3000:41 Control Module: General Checksum Failure CLEAR the Diagnostic Trouble Codes (DTCs).
WAIT at least 10 seconds.
REPEAT the self-test.
If DTC U3000:41 is retrieved again, INSTALL a new ACM. REFER to: Audio Front Control Module (ACM) .
U3000:42 Control Module: General Memory Failure CLEAR the Diagnostic Trouble Codes (DTCs).
WAIT at least 10 seconds.
REPEAT the self-test.
If DTC U3000:42 is retrieved again, INSTALL a new ACM. REFER to: Audio Front Control Module (ACM) .
U3000:92 Control Module: Performance or Incorrect Operation GO to Pinpoint Test F 
U3000:94 Control Module: Unexpected Operation If an observable symptom is not  present, DISREGARD this DTC.
If an observable symptom is present, GO to Pinpoint Test F 
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to Pinpoint Test AT 
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to Pinpoint Test AU