LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Anti-Theft System - Passive Anti-Theft System -- F250-F550 Super Duty) >> Removal And Installation >> Passive Anti-Theft System (PATS) Transceiver >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the lower steering column shroud. For additional information, refer to STEERING COLUMN .
  2. Disconnect the Passive Anti-Theft System (PATS) transceiver electrical connector.
  3. Using a suitable tool (such as a dentist pick), unclip the 2 tabs and remove the PATS transceiver.
    4. NOTE: Replacement of the PATS transceiver does not require the Integrated Keyhead Transmitters (IKTs) keys to be programmed into the Body Control Module (BCM).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals