LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Anti-Theft System - Passive Anti-Theft System -- F250-F550 Super Duty) >> General Procedures >> MyKey® Programming >> Clear MyKey™ >> With Optional Message Center

With Optional Message Center

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: This procedure is used to clear the MyKey™ feature on all of the keys that are programmed to the vehicle. All of the keys then operate as normal (admin) keys with no restrictions.
  1. Insert an admin key into the ignition and turn the key to the RUN position.
  2. From the message center main menu, use the up and down arrow buttons to scroll to and select Settings. Press the OK button.
  3. Use the up and down arrow buttons to scroll to and select MyKey. Press the OK button.
  4. Use the up and down arrow buttons to scroll to and select Clear MyKeys. Press the OK button.