LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Anti-Theft System - Passive Anti-Theft System -- F250-F550 Super Duty) >> Diagnosis And Testing >> Anti-Theft >> Principles of Operation >> Spare Key Programming

Spare Key Programming

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The customer spare key programming allows spare keys to be programmed (up to a maximum of 8) to the BCM without having to use a scan tool. Two programmed keys are required to carry out the procedure. This procedure can be disabled so that spare keys can only be programmed to the vehicle using a scan tool. Refer to KEY PROGRAMMING - PROGRAM A KEY USING TWO PROGRAMMED KEYS  for the customer spare key programming procedure or KEY PROGRAMMING - ENABLE/DISABLE SPARE KEY PROGRAMMING  for the enable/disable procedure.

scientia non olet · About LEMON Manuals