LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 713 (Exterior Trim And Ornamentation) >> Removal And Installation >> Running Board Control Module (RBM) >> Removal

Running Board Control Module (RBM): Removal

WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.

  1. 1.

    Remove the loadspace trim panel. Refer to: Loadspace Trim Panel - SuperCab/SuperCrew .

  1. 2.

    Disconnect the electrical connectors.
GFD42854Courtesy of FORD MOTOR COMPANY

  1. 3.

    Using a flat blade screwdriver or equivalent, depress the tab to remove the module.
GFD42855Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals