Powertrain Control Module (PCM): Removal

WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

1.

Disconnect the battery ground cable. REFER to: Battery Disconnect and Connect .

2.

Disconnect the PCM electrical connectors, release the harness retainers to position aside wire harness.

Courtesy of FORD MOTOR COMPANY

3.
- Remove the 2 retainers and the PCM.
  Torque
  
  : 53 lb.in (6 Nm)
- Remove the retainers and remove the PCM from the mounting frame.
  Torque
  
  : 62 lb.in (7 Nm)

Courtesy of FORD MOTOR COMPANY