LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - Powertrain DTC Charts & Descriptions (Diesel)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> P263C - Glow Plug Driver Performance

P263C - Glow Plug Driver Performance

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P263C - GLOW PLUG DRIVER PERFORMANCE

Description:  This DTC sets by the glow plug control module (GPCM) to indicate an internal software error has occurred.
Possible Causes: 
  • An attempt was made to change the calibration
  • Aftermarket performance products
  • Module programming error
  • Internal GPCM error
Diagnostic Aids: 
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST AF .