LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - Powertrain DTC Charts & Descriptions (Diesel)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> P2507 - ECM / Pcm Power Input Signal Low

P2507 - ECM / Pcm Power Input Signal Low

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P2507 - ECM / PCM POWER INPUT SIGNAL LOW

Description:  The powertrain control module (PCM) monitors the internal 5 volt power supply. When the 5 volt power supply voltage is less than a calibrated threshold this DTC sets.
Possible Causes: 
  • Charging system concern
  • Low battery voltage
  • Damaged PCM
Diagnostic Aids: 
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST AJ .
scientia non olet · About LEMON Manuals