P242D - Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 3
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P242D - EXHAUST GAS TEMPERATURE SENSOR CIRCUIT HIGH BANK 1 SENSOR 3
| Description: The powertrain control module (PCM) monitors the exhaust gas temperature (EGT) sensor for a high voltage concern. The test fails when the sensor voltage is greater than 4.90 volts for greater than 15 seconds. | |||
Possible Causes:
|
|||
| Diagnostic Aids: An EGT13_V PID value greater than 4.90 volts indicates a concern. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST RC . | ||