P2033 - Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P2033 - EXHAUST GAS TEMPERATURE SENSOR CIRCUIT HIGH BANK 1 SENSOR 2
| Description: The powertrain control module (PCM) monitors the exhaust gas temperature (EGT) sensor for a high voltage concern. The test fails when the sensor voltage is greater than 4.90 volts for more than 15 seconds. | |||
Possible Causes:
|
|||
| Diagnostic Aids:
The presence of this DTC may indicate that the vehicle is operating in derate mode and may experience a loss of power. An EGT12_V PID value greater than 4.90 volts indicates a concern. |
|||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST RC . | ||