P1703 - Brake Switch Out Of Self-Test Range
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P1703 - BRAKE SWITCH OUT OF SELF-TEST RANGE
| Description: Indicates that during key on engine off (KOEO) self-test, the brake pedal position (BPP) signal was high, or during key on engine running (KOER) self-test, the BPP signal did not cycle high and low. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Check for proper function of the stoplamps. Using the diagnostic tool, check the BOO1 PID. The stoplamps and BOO1 PID should turn on and off with brake pedal activation. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST AI . | ||