P0335 - Crankshaft Position Sensor A Circuit
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P0335 - CRANKSHAFT POSITION SENSOR A CIRCUIT
| Description: This DTC sets when the crankshaft position (CKP) sensor signal is missing for greater than a calibrated number of camshaft revolutions. | |||
Possible Causes:
|
|||
| Diagnostic Aids:
The presence of this DTC may indicate that the vehicle is operating in derate mode and may experience a loss of power. An inactive CKP signal causes a no start condition. Monitor the RPM PID while cranking the engine. A value of 0 RPM indicates a CKP concern. |
|||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST D . | ||