P0016 - Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P0016 - CRANKSHAFT POSITION - CAMSHAFT POSITION CORRELATION - BANK 1 SENSOR A
| Description: This DTC sets if the location of the gap on the crankshaft position (CKP) sensor wheel is greater than 18 degrees from the expected location on the camshaft position (CMP) sensor wheel for two detection attempts. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Verify the CKP sensor has been installed and aligned correctly. Verify the CMP sensor has been installed and aligned correctly. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST D . | ||