P0004 - Fuel Volume Regulator Control Circuit High
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P0004 - FUEL VOLUME REGULATOR CONTROL CIRCUIT HIGH
| Description: The powertrain control module (PCM) monitors the state of the fuel volume control valve (FVCV) circuit output driver. The test fails when the signal moves outside the minimum or maximum limit for the commanded state. | |||
Possible Causes:
|
|||
| Diagnostic Aids: A concern with the fuel volume control valve or FVCV circuit may cause an engine crank or no start condition. If the engine starts and the DTC P0001 is present, it indicates an intermittent concern. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST ME . | ||